# Variants of Lagrange elements

This demo (demo_lagrange_variants.py) illustrates how to:

• Define finite elements directly using Basix

• Create variants of Lagrange finite elements

We begin this demo by importing everything we require.

import matplotlib.pylab as plt
import numpy as np

import basix
import basix.ufl_wrapper
import ufl
from dolfinx import fem, mesh
from ufl import ds, dx, grad, inner

from mpi4py import MPI
from petsc4py.PETSc import ScalarType

if np.issubdtype(ScalarType, np.complexfloating):
print("Demo should only be executed with DOLFINx real mode")
exit(0)


In addition to the imports seen in other demos, we also import Basix and its UFL wrapper directly. Basix is the element definition and tabulation library that is used by FEniCSx.

## Equispaced points vs GLL points

The basis function of Lagrange elements are defined by placing points on the reference element, with each basis function equal to 1 at one point and 0 at all the other points.

To demonstrate the influence of interpolation point position, we create a degree 10 element on an interval using equally spaced points, and plot the basis functions. We create this element using Basix’s create_element function.

Basix’s function element.tabulate returns a 4-dimensional array with shape (derivatives, points, basis functions, value size). In this example, we only tabulate the 0th derivative and the value size is 1, so we take the slice [0, :, :, 0] to get a 2-dimensional array.

element = basix.create_element(basix.ElementFamily.P, basix.CellType.interval, 10,
basix.LagrangeVariant.equispaced)

pts = basix.create_lattice(basix.CellType.interval, 200, basix.LatticeType.equispaced, True)
values = element.tabulate(0, pts)[0, :, :, 0]
if MPI.COMM_WORLD.size == 1:  # Skip this plotting in parallel
for i in range(values.shape[1]):
plt.plot(pts, values[:, i])
plt.plot(element.points, [0 for _ in element.points], "ko")
plt.ylim([-1, 6])
plt.savefig("demo_lagrange_variants_equispaced_10.png")
plt.clf()


The basis functions exhibit large peaks towards the ends of the interval. This is known as Runge’s phenomenon. The amplitude of the peaks increases as the degree of the element is increased.

To rectify this issue, we can create a ‘variant’ of a Lagrange element that uses the Gauss–Lobatto–Legendre (GLL) points to define the basis functions.

element = basix.create_element(basix.ElementFamily.P, basix.CellType.interval, 10,
basix.LagrangeVariant.gll_warped)

values = element.tabulate(0, pts)[0, :, :, 0]

if MPI.COMM_WORLD.size == 1:  # Skip this plotting in parallel
for i in range(values.shape[1]):
plt.plot(pts, values[:, i])
plt.plot(element.points, [0 for _ in element.points], "ko")
plt.ylim([-1, 6])
plt.savefig("demo_lagrange_variants_gll_10.png")
plt.clf()


The points are clustered towards the endpoints of the interval, and the basis functions do not exhibit Runge’s phenomenon.

## Wrapping a Basix element

Elements created using Basix can be used directly with UFL via Basix’s UFL wrapper.

element = basix.create_element(basix.ElementFamily.P, basix.CellType.triangle, 3,
basix.LagrangeVariant.gll_warped)
ufl_element = basix.ufl_wrapper.BasixElement(element)


The UFL element ufl_element can be used in the same way as an element created directly in UFL. For example, we could solve a Poisson problem using this element.

msh = mesh.create_rectangle(comm=MPI.COMM_WORLD,
points=((0.0, 0.0), (2.0, 1.0)), n=(32, 16),
cell_type=mesh.CellType.triangle,)
V = fem.FunctionSpace(msh, ufl_element)

facets = mesh.locate_entities_boundary(msh, dim=1,
marker=lambda x: np.logical_or(np.isclose(x[0], 0.0),
np.isclose(x[0], 2.0)))

dofs = fem.locate_dofs_topological(V=V, entity_dim=1, entities=facets)

bc = fem.dirichletbc(value=ScalarType(0), dofs=dofs, V=V)

u = ufl.TrialFunction(V)
v = ufl.TestFunction(V)
x = ufl.SpatialCoordinate(msh)
f = 10 * ufl.exp(-((x[0] - 0.5) ** 2 + (x[1] - 0.5) ** 2) / 0.02)
g = ufl.sin(5 * x[0])
L = inner(f, v) * dx + inner(g, v) * ds

problem = fem.petsc.LinearProblem(a, L, bcs=[bc], petsc_options={"ksp_type": "preonly", "pc_type": "lu"})
uh = problem.solve()


## Computing the error of an interpolation

To demonstrate how the choice of Lagrange variant can affect computed results, we will compute the error when interpolating a function into a finite element space. For this example, we define a saw tooth wave that will be interpolated into a Lagrange space.

def saw_tooth(x):
f = 4 * abs(x - 0.43)
for _ in range(8):
f = abs(f - 0.3)
return f


We begin by interpolating the saw tooth wave with the two Lagrange elements, and plot the finite element interpolation.

mesh = mesh.create_unit_interval(MPI.COMM_WORLD, 10)

x = ufl.SpatialCoordinate(mesh)
u_exact = saw_tooth(x[0])

for variant in [basix.LagrangeVariant.equispaced, basix.LagrangeVariant.gll_warped]:
element = basix.create_element(basix.ElementFamily.P, basix.CellType.interval, 10, variant)
ufl_element = basix.ufl_wrapper.BasixElement(element)
V = fem.FunctionSpace(mesh, ufl_element)

uh = fem.Function(V)
uh.interpolate(lambda x: saw_tooth(x[0]))

if MPI.COMM_WORLD.size == 1:  # Skip this plotting in parallel
pts = []
cells = []
for cell in range(10):
for i in range(51):
pts.append([cell / 10 + i / 50 / 10, 0, 0])
cells.append(cell)
values = uh.eval(pts, cells)
plt.plot(pts, [saw_tooth(i[0]) for i in pts], "k--")
plt.plot(pts, values, "r-")

plt.legend(["function", "approximation"])
plt.ylim([-0.1, 0.4])
plt.title(variant.name)

plt.savefig(f"demo_lagrange_variants_interpolation_{variant.name}.png")
plt.clf()


The plots illustrate that Runge’s phenomenon leads to the interpolation being less accurate when using the equispaced variant of Lagrange compared to the GLL variant.

To quantify the error, we compute the interpolation error in the $$L_2$$ norm,

$\left\|u - u_h\right\|_2 = \left(\int_0^1 (u - u_h)^2\right)^{\frac{1}{2}},$

where $$u$$ is the function and $$u_h$$ is its interpolation in the finite element space. The following code uses UFL to compute the $$L_2$$ error for the equispaced and GLL variants. The $$L_2$$ error for the GLL variant is considerably smaller than the error for the equispaced variant.

for variant in [basix.LagrangeVariant.equispaced, basix.LagrangeVariant.gll_warped]:
element = basix.create_element(basix.ElementFamily.P, basix.CellType.interval, 10, variant)
ufl_element = basix.ufl_wrapper.BasixElement(element)
V = fem.FunctionSpace(mesh, ufl_element)

uh = fem.Function(V)
uh.interpolate(lambda x: saw_tooth(x[0]))
M = fem.form((u_exact - uh)**2 * dx)
error = mesh.comm.allreduce(fem.assemble_scalar(M), op=MPI.SUM)

print(f"Computed L2 interpolation error ({variant.name}):", error ** 0.5)


## Available Lagrange variants

Basix supports numerous Lagrange variants, including:

• basix.LagrangeVariant.equispaced

• basix.LagrangeVariant.gll_warped

• basix.LagrangeVariant.gll_isaac

• basix.LagrangeVariant.gll_centroid

• basix.LagrangeVariant.chebyshev_warped

• basix.LagrangeVariant.chebyshev_isaac

• basix.LagrangeVariant.chebyshev_centroid

• basix.LagrangeVariant.gl_warped

• basix.LagrangeVariant.gl_isaac

• basix.LagrangeVariant.gl_centroid

• basix.LagrangeVariant.legendre

### Equispaced points

The variant basix.LagrangeVariant.equispaced defines an element using equally spaced points on the cell.

### GLL points

For intervals, quadrilaterals and hexahedra, the variants basix.LagrangeVariant.gll_warped, basix.LagrangeVariant.gll_isaac and basix.LagrangeVariant.gll_centroid all define an element using GLL-type points.

On triangles and tetrahedra, the three variants use different methods to distribute points on the cell so that the points on each edge are GLL points. The three methods used are described in the Basix documentation.

### Chebyshev points

The variants basix.LagrangeVariant.chebyshev_warped, basix.LagrangeVariant.chebyshev_isaac and basix.LagrangeVariant.chebyshev_centroid can be used to define elements using Chebyshev points. As with GLL points, these three variants are the same on intervals, quadrilaterals and hexahedra, and vary on simplex cells.

### GL points

The variants basix.LagrangeVariant.gl_warped, basix.LagrangeVariant.gl_isaac and basix.LagrangeVariant.gl_centroid can be used to define elements using Gauss-Legendre (GL) points. GL points do not include the endpoints, hence this variant can only be used for discontinuous elements.

### Legendre polynomials

The variant basix.LagrangeVariant.legendre can be used to define a Lagrange-like element whose basis functions are the orthonormal Legendre polynomials. These polynomials are not defined using points at the endpoints, so can also only be used for discontinuous elements.